Reactor Controller (Basic)

Ways to make it2
Recipes it goes into1
What it is
The reactor's screen: it turns the reactor on and shows heat, fuel, waste and output. Every reactor needs one, on a face.
How to use it
- Build a three by three by three box: 22 Reactor Casing, a Fuel Rod in the centre and a Control Rod above it in the top face.
- Put this Controller, a Solid Access Port and an Active Power Tap in the middle of three side faces.
- Set the Access Port to inlet and put uranium ingots in it.
- Turn the reactor on in the Controller and connect a cable to the Power Tap. If it does not form, right-click any of its blocks to see why.
How it is made
What it takes
Everything you would have to gather
The 2 marked can be crafted too. Pick a bigger depth, or open it on its own page.
Tick what you already have.
What it is for
Play ATM10 on our server
Everything on this page is read from the ATM10 server we run, and 28 members have played on it. Your first week there is free, with no card.




