Oxygen Distributor

What it is
Once you have supplied the oxygen distributor with an infinite water source, sufficient energy and a completely sealed room, it will distribute oxygen in that room. To check that oxygen is being distributed, click "show" in the distributor GUI. If the room is highlighted, that means that the oxygen has been successfully distributed. If there is a hole in your structure that is causing oxygen to escape, the distributor GUI will provide a warning. Patch the hole to avoid unnecessary power draw and oxygen usage. After that, you should be able to take off your oxygen suit and survive. Each oxygen distributor can support up to 6,000 blocks, allowing you to build a moderately sized space station or base. If you need more, you can place more oxygen distributors. Inside your oxygenated structure, you should provide proper ventilation to ensure that oxygen does not get blocked when a door is closed. To do this, you can create a one-block gap in between walls or use a vent block to allow oxygen flow. When your structure is fully sealed, and a hole is created, your structure will rapidly depressurize. This can be a catastrophic event. All entities inside will be violently sucked out of the hole and die without a space suit. The oxygen distributor will also rapidly drain oxygen and power. Avoid this by patching holes as soon as possible and by preventing accidental holes from being created.
What it takes
Everything you would have to gather
The 6 marked can be crafted too. Pick a bigger depth, or open it on its own page.
Tick what you already have.
What it is for
Play ATM10 on our server
Everything on this page is read from the ATM10 server we run, and 28 members have played on it. Your first week there is free, with no card.




