UV Light Box

What it is
The UV Light Box/$ is a machine in which you can expose PCB's/$ to UV light, at certain places (which is determined by the Blueprint/$ laying on top of the PCB). The exposure process takes a maximum of 10 minutes; less if you add Speed Upgrades/$ to the machine. After the full 10 minutes, you'll have a 100% chance that the PCB/$ will be successfully etched in Etching Acid/$. You can however expose the PCB for a shorter time, which will result in a lower chance of the PCB successfully being etched. Note that exposure progress is faster when the total progress is lower, and slower toward the end. You can manually adjust the completion threshold via the GUI slider, but it's also possible to set this via a redstone signal; set the redstone mode to Interpolate Threshold/$. In this mode, the threshold is fixed to 25% + 5% per signal level (although a signal of 0 disables the machine, so 30%-100% in effect). This may be handy if you want to set the threshold of many lightboxes at once.
What it takes
Everything you would have to gather
The 2 marked can be crafted too. Pick a bigger depth, or open it on its own page.
Tick what you already have.
What it is for
Play ATM10 To The Sky on our server
Everything on this page is read from the ATM10 To The Sky server we run. Your first week there is free, with no card.



