Turbine Controller (Basic)

Ways to make it1
Recipes it goes into1
What it is
The turbine's screen: flow rate, rotor speed and the switch that engages the coils.
How to use it
- Build a box of Turbine Housing, at most five by five across and ten high, with the Rotor Bearing in the middle of one face.
- Run Rotor Shafts from the bearing to the far side. Put Rotor Blades next to the bearing and coil blocks around the shaft past them.
- Add this Controller, a Fluid Port for steam in, another set to output for water, and a Power Tap.
- Open the Controller, engage the coils and set the flow rate. The turbine works best at 900 or 1800 RPM.
Turbines: rotor, blades and coils, in the Extreme Reactors guide
What it takes
Everything you would have to gather
The 2 marked can be crafted too. Pick a bigger depth, or open it on its own page.
Tick what you already have.
What it is for
Play ATM10 on our server
Everything on this page is read from the ATM10 server we run, and 28 members have played on it. Your first week there is free, with no card.




